ACOM 2000S | Automatic Antenna Selector

ACOM 2000S | Automatic Antenna Selector


Usage
The ACOM 2000S is an automatic 1 out of 10 antennas selector. ACOM 2000S accepts serial RS-232 input command for antenna number selection from ACOM 2000A amplifier or other device and sends a 4-bit parallel BCD inverted output code command to antenna switch (e.g. ACOM 2000SW).

Easy to operate

  • No operator intervention is required at all when used with the ACOM2000A amplifier or controlled via PC/device. Thus the risk of inadvertent errors, such as incorrect antenna selection is eliminated;
  • Tactile and sound feedback when antenna number is selected manually via Up/Down buttons;

Compatibility

  • Directly compatible with ACOM 2000A automatic HF linear amplifier and ACOM 2000SW remote antenna switch;
  • Control is compatible with other systems via RS-232 serial input from PC/device and inverse BCD output code to antenna switch;

Integration capabilities

  • When used in combination with the ACOM 2000SW remote antenna switch and the ACOM 2000A Automatic HF Linear Amplifier, antenna selection information generated by the ACOM 2000A is communicated to the 2000S. The 2000S displays the currently selected antenna and drives the control signals needed to operate the remotely-located ACOM 2000SW;
  • The 2000S includes a general-purpose RS-232 control port. This port can be driven by a PC, allowing the 2000S/2000SW combination to be used in environments where computer-controlled switching of multiple antennas is required. All functions are accessible from a PC via serial port connection;

Protection
Monitors “ready to transmit” parallel input signal from antenna switch and generates “Transmit Inhibit” output signal to the transceiver for maximum operating flexibility and anti-hot switching protection.

LED indicator
Antenna number 7-segment LED indicator plus sound alarm.

Network capability
Local network capability, compatible with ACOM 2000A automatic HF linear amplifier.

Software integration
Different software solutions are available in Internet (NOT offered by ACOM) for automatic tuning of all antennas on all band segments when using the 2000S and 2000SW with or without the ACOM 2000A amplifier. These software solutions require a special set of connection cables. Please, contact us for cable details when purchasing our products.


Number of Antennas

  • Selectable: 1 out of 10;

Input Control

  • RS-232, ±12 V serial port of ACOM 2000A and/or PC/device (Serial port parameters: 1200, N, 8, 1);
  • Simple commands;

Output Control

  • 4-bit inverted parallel BCD code, 27 V / 25 mA bit levels;
  • Logical Low Input: -1 ... +1.25 V, 1.2 kOhm input resistance;
  • Logical High Input: +7.5 ... +18 V, 1.2 kOhm input resistance;
  • Logical Low Output: 0 ... +1 V, 15 mA drive, 60 mA sink;
  • Logical High Output: +20 ... +30 V, 1.2 kOhm input resistance;

KEY-IN

  • Open KEY voltage (drive): +10 ... +12 V;
  • Closed KEY current (drive): 10 ... 12 mA;
  • Input voltage (resistance) @ 12 mA: -1 ... +2 V (0 ... 160 Ohm) to consider the KEY is "closed";

KEY-OUT

  • Switching voltage (open circuit): -0.5 ... +40 V;
  • Switching current (closed circuit): 0 ... 20 mA sink;
  • Output resistance @ 20 mA sink current (closed circuit): 100 ... 120 Ohm;

Output Power Supply Voltage for External Devices

  • +20 ... +30 V unregulated, 0 ... 200 mA;

Power Supply

  • 120/240 VAC internally selectable, ±10% tolerance, 50-60 Hz, 15 VA;

Size & Weight (operating, excluding connected cables)

  • WxDxH: 131x164x51 mm, 1.3 kg (5.2x6.5x2.1 inches, 2.9 lbs.);

Shipping Size & Weight

  • WxDxH: Approx. 180x200x100 mm, 1.9 kg (7.1x7.9x4.0 inches, 4.2 lbs.);
  • Please, contact us for shipment details;

Operating environments

  • Temperature range: 0 to +50 degrees Celsius (32 degrees F to 122 degrees F);
  • Relative air humidity: up to 95% @ +35 degrees Celsius (95 degrees F);
  • Height above sea level: up to 3050 m (10000 ft) without output deterioration.